Breaking News
Loading...
Thursday, April 7, 2016

Info Post
By Richard Barnes


Various factors contribute to the decrease of pool water. The common ways include; evaporation, filter backwashing, and water that is splashed out during the swimming activity. However, when you discover the level of water keeps on dropping day in day out, there must be a leak. When the level you need to fill up is more than three inches, for three consecutive weeks it is a confirmation of leakage. You can identify the leakage point without necessarily involving the technician. There are hosts of procedures of pool leak detection Orange County that can be followed to identify the source, and fix it.

Keen eye for detail and precision are aspects that will simplify the search procedure. It is important to begin with the obvious. The equipment pad should be thoroughly checked, but emphasizing on the pump, heater, filter, and pipe valves. The area around the pool should be surveyed, to establish whether there is moisture.

Areas that have eroding or wet soils indicate presence of pool water. In case of Vinyl liner pool, find separation or tears around the skimmers, fittings, corners, steps, and returns. The city Orange County, CA has many technician who offers pool maintenance services, giving you an opportunity to engage in other productive activities.

The exact point of leak is identified by first marking the level of water at the skimmer. The grease pencil or markers tape should be used to put a permanent mark. When the level drops to over a quarter inch, it is an indication of much loss. Another trick is to place a bucket filled with pool water, and supported with a brick at the step. Both inner and outer level should be marked after ensuring they are equal. The bucket should be observed, and the outside drop measured. The higher the volume of water lost, the bigger the leak opening.

The changes should be checked after a period of twenty-four hours. A significant drop of the level outside the bucket is an indication of a leak. The city Orange County, CA is a home for companies that can assist in determination of the leaks position. The determination process begins by switching off the filtration system, and noting the place where water does not drop. In case you have a liner type and water is rapidly dropping, the attention of a professional will be required.

Presence of a leak at the skimmer or filtration system can be confirmed when the water stops dropping below the skimmer opening. The suction side of the filtration system may have faults in case bubbles are formed at the return line. Problems at the light housing are confirmed when the drops stops at the light. The ideal reagent for identifying the exact location of leakage is the pH indicator.

The treatment or fixing procedure might be simple or difficult depending on the position of a leak. The separation that occurs between the plastic part and concrete one is the major cause of skimmer leakage. Pool putty can fix such errors with ease.

When the leaks are not identified by the above techniques, contacting your local technician is vital. In Orange County, CA the pool maintenance experts are highly trained and experienced. Make sure the contractor has a license. The building department maintains a database of contractors who are licensed and certified. Insurance is also mandatory since it exempt you from being liable in case the contractor is involved in an accident.




About the Author:



0 comments:

Post a Comment